LED display screen: Avoid touching the key areas with hard objects

Key Daily Habits to Keep Hard Objects Away From LED Screens

Forming small, consistent habits in your daily use can cut most scratch and impact risks without extra complicated operations. Always keep all sharp items like keys, metal clips, pens and rough hard tools at least 30cm away from the display area when the LED screen is powered on or placed on a flat surface. Do not place any stacked heavy items on the top of the screen frame even when the device is turned off, as accidental sliding of these items can leave deep irreversible marks on the lamp bead surface. Before you close the protective cover or move the screen to a storage spot, do a quick visual check on the surrounding area to clear away any loose hard debris that might get dragged across the display during movement. For public use spaces like shared work areas or lounge zones, mark a clear no-item zone around the screen base to remind all users not to set down personal belongings near the display.

Proper Handling Rules During Installation and Transportation

Most unexpected impact damages happen during moving and setup processes, so following standard handling steps can avoid most unnecessary physical harm. Never drag or slide the LED screen across rough concrete, wooden planks or grit covered tabletops when you need to adjust its position, always lift the whole device evenly by the reinforced frame edges instead of holding the thin display panel directly. Wrap all exposed corners of the screen with soft shock absorbing layers before you move it through narrow doorways or crowded spaces, to prevent accidental bumps against wall edges or metal door frames. Do not use ropes or hard straps that press directly on the display surface when you fix the screen for transit, all binding force should act only on the outer structural frame to avoid squeezing the fragile lamp bead area. Keep the screen in an upright stable position during the whole moving process, never lay it flat under other heavy equipment even for a short temporary stop.

Safe Cleaning Practices That Prevent Accidental Scratches

Many users cause unintended scratches during regular cleaning, and using the right methods keeps the screen clean without bringing hard materials into contact with the display surface. Always power off the screen and wait for it to cool down completely before you start any cleaning work, this lets any loose hard dust particles sit steady on the surface instead of sticking tight to the slightly warm lamp beads. Use only soft lint free cloth or natural soft bristle brushes to gently sweep away surface dust, never use rough paper towels, old rags with hidden hard threads or any abrasive wiping tools. Do not apply any cleaning liquid directly onto the screen surface, spray the mild cleaning agent only on the soft cloth first then wipe the display with extremely light pressure, never press hard on the panel no matter how stubborn the stain looks. Check the cleaning cloth carefully before every use to make sure there are no trapped sand grains, metal fragments or small hard debris hidden in the fabric fibers that could leave fine scratches as you wipe.